AHK series (2-stage)

Hypoid
  • Heavy Duty right angel Hypoid gearbox
  • Black coated steel housing, aluminum output and motor adapter flange
  • Steel output shaft, flange ISO 9409
  • Helical gear technology
  • Nominal Torques:
    • T2N : 24 Nm - 6.675 Nm
  • Ratios
    • 2-stage : 12 / 15 / 16 / 20 / 25 / 28 / 35 / 40 / 49 / 50 / 70 / 100
  • Low Backlash
    • 2-traps : ≤ 2 arcmin (bouwgrootte 064 ≤ 3 arcmin)
  • High Efficiency
    • 2-stage : ≥ 94%
  • Easy mount
  • Low noise
  • Compact structure
  • Sizes available: AHK064 / AHK090 / AHK110 / AHK140 / AHK200 / AHK255 / AHK285 / AHK355

Model

Stage Ratio1 AHK064 AHK090 AHK110 AHK140 AHK200 AHK255 AHK285 AHK355
Nominal output torque T2N Nm 2 12 100 200 400 805 1,495 - - -
15 - - - - - 2,005 3,675 6,510
16 100 225 405 815 1,510 - - -
20 100 230 405 820 1,520 1,780 3,710 6,570
25 95 195 350 710 1,320 1,775 3,735 6,615
28 92 200 400 800 1,535 - - -
35 95 200 355 715 1,330 1,950 3,750 6,675
40 72 160 340 680 1,440 - - -
49 63 135 290 585 1,105 1,680 2,685 5,470
50 90 200 360 725 1,345 1,800 3,000 5,500
70 60 130 250 440 990 1,510 2,550 4,820
100 24 57 160 350 655 1,005 1,685 3,315
Emergency stop torque T2NOT Nm 2 4~100 2 times nominal output torque T2N
Max. Acceleration torque T2B Nm 2 4~100 1,5 times nominal output torque T2N
No load running torque  (2) Nm 2 12~100 1 1,3 2 3,1 6 13 16 20
Backlash  (3) arcmin 2 12~100 ≤ 3 ≤ 2 ≤ 2 ≤ 2 ≤ 2 ≤ 2 ≤ 2 ≤ 2
Torsional rigidity Nm/
arcmin
2 12~100 12 27 56 112 389 642 1,275 2,500
Nominal input speed N1N rpm 2 12~100 3,000 3,000 2,800 2,700 2,200 2,100 2,000 1,600
Max. input speed N1B rpm 2 12~100 6,000 6,000 6,000 4,500 4,500 4,000 3,000 2,500
Max. radial load F2a (4) N 2 12~100 1,690 2,220 4,070 8,530 17,000 26,900 39,200 101,500
Max. Bending moment M2k(4) Nm 2 12~100 120 280 480 1,310 3,530 5,920 9,230 29,100
Operating temperature ºC 2 12~100 -10ºC ~+ 90ºC
Degree of Protection 2 12~100 IP65
Lubrication 2 12~100 Synthetisch lubrication grease
Mounting position 2 12~100 All directions
Running noise (3) dB(A) 2 12~100 ≤ 64 ≤ 66 ≤ 68 ≤ 68 ≤ 70 ≤ 70 ≤ 72 ≤ 74
Efficiency % 2 12~100 ≥ 94 %
  1. Ratio ( i = N in / N out )
  2. Backlash is measured at 2% of Nominal output torque T2N.
  3. These values are measured by gearbox with ratio = 10 (1-stage) or ratio = 100 (2-stage) at 3.000 rpm without load.
  4. Applied to the output flange center at 100 rpm.
  5. Continuous operation is not recommended.

Maximum tilting moment:

AH Tilting Moment

 

 

 

Max Tilting Moment

 

 

 

 

Size AHK064 AHK090 AHK110 AHK140 AHK200 AHK255 AHK285 AHK355 AHK450
Z2 (mm) 63.7 84.5 106.2 90 122.8 133.2 175.5 220.6 275.3

Applied to the output flange center at 100 rpm.

 


Download as PDF

Model No. AHK064 AHK090 AHK110 AHK140 AHK200 AHK255 AHK285 AHK355
Ø (1) (C3) 2-st. 2-st. 2-st. 2-st. 2-st. 2-st. 2-st. 2-st.
8 kg*cm2 0.10 - - - - - - -
11 0.17 0.18 - - - - - -
14 0.21 0.50 0.52 - - - - -
19 - 0.65 1.69 1.71 - - - -
24 - - 4.89 5.05 6.92 - - -
28 - - - 6.55 6.98 - - -
32 - - - 9.47 10.18 10.18 - -
35 - - - 14.91 15.21 15.21 15.68 -
38 - - - 20.69 20.70 20.70 21.69 23.46
42 - - - - 22.83 22.83 23.59 25.28
48 - - - - 58.45 58.45 59.30 61.61
55 - - - - - - - 89.67

(1) ø = Input shaft diameter


Download as PDF

AHK 2-stage series:

 Dimensions AHK064 AHK090 AHK110 AHK140 AHK200 AHK255 AHK285 AHK355
D1 H7 20 31.5  40 50 80 100 100 120
D2 31.5 50 63 80 125 140 160 200
D3 h7 40 63 80 100 160 180 200 250
D4 h7 64 90 110 140 200 255 285 355
D5 79 109 135 168 233 280 310 385
D6 x pitch x deep M5 x 0.8P x 8 M6 x 1P x 10 M6 x 1P x 11  M8 x x1.25P x15 M10 x 1.5P x 20 M16 x 2P x 25 M20 x 2.5P x 31 M24 x 3P x 32
D7 88 120  147 180 249.5 302 332 415
D8 4.5 5.5 5.5 6.6 9 13.5 13.5 17.5
L1 8 15 15 15 16 16 16 35
L2 19.5 30 29 38 50 66 75 80
L3 4 7 7 7.5 8.5 13.5 16.5 20
L4 5 7 8 10 12 18 20 45
L5 10 13 17 25 31 31 36 43
L6 87 90.5 114 147.5 175 191.5 249.5 290
L7 44.5 53 68.3 89 115 115 131 165
L8 151 173.5 211.3 274.5 340 372.5 455.5 535
L9 94 114.5 129 173.5 228 228 265.5 294.5
X in degrees 36 30 22,5 30 30 24 24 22.5
Y in degrees 36 30 22,5 30 30 24 24 22.5
Z 10 12 16 12 12 12 13 16
U in degrees 45 45 22.5 30 30 22.5 22.5 30
V in degrees 45 45 22.5 30 30 22.5 22.5 30
W 8 8 16 12 12 16 16 12
(1) Input dimensions vary according to motor flange. Please contact Apex Dynamics for details.