Hypoid
MGOKA series (3-stage)
- Wide holes in output flange
- Output flange ISO 9409
- Ratio 100 to 1000
- Torque 1,770 Nm – 4,035 Nm
- Wide holes in output flange, ideal for rack and pinion mounting
- Reinforced axial and radial load
- Heavy Duty gearbox
- Steel output flange ISO 9409
- Helical gear technology
- Nominal Torques:
- T2N : 1,770 Nm - 4,035 Nm
- Ratios
- 3-stage : 100 / 125 / 140 / 175 / 200 / 250 / 350 / 500 / 700 / 1,000
- Low Backlash
- 3-traps : ≤ 4 arcmin
- High Efficiency
- 3-stage : ≥ 92%
- Easy mount
- Low noise
- Compact structure
- Sizes available: MGOKA320
|
Model |
Stage | Ratio1 | MGOKA320 | |
| Nominal output torque T2N | Nm | 3 | 100 | 3,875 |
| 125 | 3,900 | |||
| 140 | 3,910 | |||
| 175 | 3,930 | |||
| 200 | 3,945 | |||
| 250 | 3,970 | |||
| 350 | 4,000 | |||
| 500 | 4,035 | |||
| 700 | 3,090 | |||
| 1,000 | 1,770 | |||
| Emergency stop torque T2NOT | Nm | 3 | 100~1,000 | 2 times nominal output torque T2N |
| Max. Acceleration torque T2B | Nm | 3 | 100~1,000 | 1,5 times nominal output torque T2N |
| No load running torque (2) | Nm | 3 | 100~1,000 | 6 |
| Backlash (3) | arcmin | 3 | 100~1,000 | ≤ 4 |
| Torsional rigidity | Nm/ arcmin |
3 | 100~1,000 | 1,275 |
| Nominal input speed N1N | rpm | 3 | 100~1,000 | 2,100 |
| Max. input speed N1B | rpm | 3 | 100~1,000 | 4,000 |
| Max. radial load F2a(4) | N | 3 | 100~1,000 | 46,000 |
| Max. Tilting moment M2a(4) | Nm | 3 | 100~1,000 | 22,000 |
| Operating temperature | ºC | 3 | 100~1,000 | -10ºC ~+ 90ºC |
| Degree of Protection | 3 | 100~1,000 | IP67 | |
| Lubrication | 3 | 100~1,000 | Synthetisch lubrication grease | |
| Mounting position | 3 | 100~1,000 | All directions | |
| Running noise (3) | dB(A) | 3 | 100~1,000 | ≤ 72 |
| Efficiency | % | 3 | 100~1,000 | ≥ 92 % |
- Ratio ( i = N in / N out )
- Backlash is measured at 2% of Nominal output torque T2N.
- These values are measured by gearbox with ratio = 10 (1-stage) or ratio = 100 (2-stage) at 3.000 rpm without load.
- Applied to the output flange center at 100 rpm.
- Continuous operation is not recommended.
| Model | MGOKA320 | |
| Ø (1) (C3) | 3-st. | |
| 32 | kg*cm2 | 10.18 |
| 35 | 15.21 | |
| 38 | 20.70 | |
| 42 | 22.83 | |
| 48 | 58.45 | |
(1) ø = Input shaft diameter
MGOKA 3-stage serie:
| Dimensions | MGOKA320 |
| D1 H7 | 100 |
| D2 | 160 |
| D3 h7 | 208 |
| D4 h7 | 320 |
| D5 | 368 |
| D6 x pitch x deep | M20 x 2.5P x 31 |
| D8 | 26 |
| D8 Fastening* | M24 |
| D9 | 210 |
| D10xPitch | M16x2P |
| D11xPitch | M16xP2 |
| D12 | 15.7 |
| L1 | 16 |
| L2 | 79.9 |
| L3 | 16.5 |
| L4 | 25 |
| L5 | 31 |
| L6 | 323.4 |
| L7 | 115 |
| L8 | 518.3 |
| L9 | 228 |
| L10 h8 | 350 |
| L11 | 390 |
| L13 | 119.2 |
| L14 | 154 |
| L15 | 115.8 |
| L16 | 148.9 |
| X in degrees | 24 |
| Y in degrees | 24 |
| Z | 12 |
(1) Input dimensions vary according to motor flange. Please contact Apex Dynamics for details.
(2) Refer tot the MGO series for flange interfaces.
* Please apply the special washer provided by APEX.
(2) Refer tot the MGO series for flange interfaces.
* Please apply the special washer provided by APEX.
Brochure Need help with your application? Our specialists are happy to use their years of experience to assist you in selecting the right products.
